Description
Swapmod A2L — Automatic Plate Changer for Bambu Lab A2L
What swapmod does
swapmod is a plate-changing add-on for the Bambu Lab A2L. It lets your printer work through several plates in sequence without anyone intervening: print multiple plates from one project file, combine several files into one queue, or repeat the same plate over and over. Drop your gcode.3mf files into the swaplist app, choose the order, start the queue.
How the plate changer works
The printer loads a blank plate from the magazine, prints on it, ejects it when finished and pulls in the next one. This continues until the queue is done or the magazine is empty. No restarts, no clearing the bed between jobs.
What you can expect
This version of swapmod is a downloadable digital product. Means you will get a file with all needed presets so you just need load some filament on your BambuLab A2L and hit “print”. The 3MF file is preset and all components are fit on only two build plates (one for PLA and another for PETG components). Assembling and installing requires absolutely no technical skills, it takes only a few minutes and you will be assisted by a very detailed video guide. You don’t need to deal with the gCode as you get access to an app which will do it for you. You can load up to multiple build-plates into the magazine. We recommend using up to 8 plates for an reliable result, but higher amount is possible.
What you need
- A Bambu Lab A1 mini and at least two build plates
- Bambu Studio or Orca Slicer, which you are almost certainly using already
- About 900g of PLA (roughly 26 hours of printing)
- About 300 g of PETG (roughly 7 hours of printing)
- 10 round magnets, 10 mm diameter, 3 mm thick
- 15 button head screws, ISO 7380-1, M3 × 8 mm, plus 4 screws for each build plate
A pre-composed set of screws and magnets is available in our shop (EU shipping only). As these are standard hardware components, they can be sourced from anywhere, including your local supplier.
What you get
- The complete 3MF file with all presets — load filament, press print
- A detailed video assembly guide
- A self-test file to confirm everything works before your first real queue
- Access to the swaplist app, which builds the print queue for you
- Free access to every future revision of the files
- An invitation to the swapmod Discord, where users and our moderators answer questions
How this compares to other options
- Affordable — this is the smallest step into automated plate changing
- Instant — download after purchase, start printing the same evening
- Scalable — equip as many of your own printers as you own, at no extra cost
- Updatable — every future revision included
- Repairable – You can reprint any part at any time
- Simple — no motors, no wiring, no electronics
- Extendable — free mods and accessories, including a rail system
- Supported — an active community and moderators who answer
- Original — the most trustful option you can to chose
Honest limitations
- You still remove the parts from the ejected plates yourself. Swapmod automates plate changes and restarts, not post processing.
- It is a DIY product. You print and assemble it, so the result depends partly on your printer and filament presets being well tuned.
- Plate changes are reliable but not infallible. A failure usually means the printer stops, not that anything breaks — but see the safety notes below.
- Bambu Lab’s manual says nothing should sit in front of or behind the printer. swapmod does exactly that. Your printer warranty may not cover damage caused by using it. The full safety notes are above in a product safety tab. Please read them before buying. If you are not comfortable with these risks, this product is not for you.
Magazine capacity
We recommend up to eight plates for consistently reliable results. More is possible, and plenty of users run more, but eight is the number we are comfortable putting our name to.
